PPT Slide
RECORDING PC’s (Machines 1-14) - Main Recording Software
Configures COM Port and Language (A, C, E, R, F, S, FL)
Built-in-Test listens to SSTI Controller at program start up and will show fault symbol if system is not ready
Large red recording symbol and flashing LED illuminates during recording for at-a-glance status
Progress Bar visually shows % completion of each 12 minute (nominal) recording segment
Pause Symbol illuminates if recording is paused. Real-time indicator appears below to show actual time the pause began
Session End Symbol illuminates if operator has terminated the recording session. Real-time indicator appears below to show actual time the session was ended.
Session Erased symbol appears when operator erases a previously specified session and turns the erase key on the control panel. Status Panel will show file to be erased before erasure. When erase key is actually turned, the SESSION ERASED symbol will go from a “gray out” condition to illuminated, and the Date/Time Erased area will show when the erase key was actually turned.
DRS Status Panel Layout and Functions
Total elapsed time since the recording session began. When paused or ended, the ET counter stops.
Time the current session began
Current time and date, as provided by the PC’s system clock
Segment time remaining. Counts down each recorded segment.
Displays current recording format: TrueSpeech or Microsoft .WAV
Current file name being recorded. “??” progresses from 00 to 99 during a session