PPT Slide

WORKSTATION PC - At-a-Glance Graphical Status of the System’s Health

DRS Network Monitor

Status Indicator Area for

each Recording PC language pair.

OK indicates that Machine “A” and

“B” both are ready to record or are

recording correctly. The system

continuously monitors a “heartbeat”

from each PC every few seconds.

Overall System Health Indicator

Status area shows the current

system operating mode

The Network

Monitor application

normally resides on

the “Server” (i.e.

Workstation), so its

drive letter =C.

However, the

Network Monitor

may be located

remotely on another

PC other than the

Workstation if

desired, and

then path letter of

the Server would

be entered here

(e.g. ‘R’)

Check this box if you don’t want

to hear the audible alarm from the

Workstation when a System Fault

is detected.

LEDs flash on and

off when recording is

actually taking place on

a given machine during

“Recording in Progress” mode.

Other Indicators in the Status Indicator Area:

2).

Machine “A” is not

providing a “heartbeat” that

says that it is capable of recording

Yellow Arrow shows

location of the machine

that is not ready.

3).

During “Recording in

Progress” Mode, neither

Machine “A” or “B” is

actively recording

1).

Fault symbol

and audible alarm commence if any PC in system has a fault

NOTE: The DRS Network Monitor may be

co-located on the DRS Workstation/Server

(recommended) or it may be located on a

remote, independent machine if desired

Previous slide

Next slide

Back to first slide

View graphic version